CrimeStopper FS-99 Guía de instalación descargar pdf (Pagina 33)

REMOTE PROGRAMMING DIAGRAM

Note: All transmitter codes must be learned at time of programming!! The system learns up to 4 different

transmitter codes.

1. Turn Ignition Key to the ON position. (Pink wire must be connected.)

2. Press Programming button 4 times, then after a few seconds the unit Chirps Siren, Horn and Flashes the parking

lights 4 times.

3. Press button #1 of the transmitter to be coded. You should get 1 Chirp/Honk indicating the first remote is coded,

and then press button #1 of a second transmitter, the unit will Chirp/Honk twice indicating the second remote is

coded and so on. If all 4 codes are learned, the unit will automatically exit code learning mode, otherwise turn

key off.

4. The system with Chirp/Honk 4 times when exiting learn mode.

IGN

OFF

WAIT FOR

4 FLASHES

PRESS 4X's

CHRIPS 1,2, 3, or 4 X's

IGN

OFF

PRESS LOCK

COMPLETE

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 39 40

Sin comentarios

CrimeStopper FS-99 Guía de instalación Pagina 33