CrimeStopper FS-99 Guía de instalación descargar pdf (Pagina 14)

WIRING: 2-PIN LED / 2-PIN Program-Valet Button (22 gauge wires)

Mount LED in a visible location on the Dash or Console. Connect the small 2-pin plug from the LED to the control

module. Note: Connectors are designed so that they will only plug into their appropriate slots.

Mount the Valet/Program/Override button in a suitable location. Connect the 2-pin plug from the Switch to the

control module. Note: Connectors are designed so that they will only plug into their appropriate slots.

POWER DOOR LOCKS: WIRING & SYSTEM TYPES

DETERMINING DOOR LOCK TYPE:

We recommend determining the type of locking system the vehicle has before connecting any wires. Most new

vehicles have data controlled door locks and require a data module to interface with the vehicle computer. Please

go to the Databus section of the Crimestopper website. Select the type of data module (Fortin or ADS) and it will

take you to a vehicle fit guide to determine the best solution for your vehicle. Incorrect connection may result in

damage to the alarm and/or vehicle locking system. The system has 2 Built-In relays to interface with most door lock

systems. The following door lock information is provided as a guide. Your vehicle may differ.

LOCK RELAY: (On-Board Relay)

WHITE: Normally Closed (Terminal 87A On-board Lock Relay)

GREEN: LOCK Output (Terminal 30 On-board Lock Relay)

VIOLET/BLACK (Fused 10A): Normally Open (Terminal 87 On-board Lock Relay)

UNLOCK (On-Board Relay):

BROWN: Normally Closed (Terminal 87A On-board Unlock Relay)

BLUE: UNLOCK Output (Terminal 30 On-board Unlock Relay)

VIOLET (Fused 10A): Normally Open (Terminal 87 On-board Unlock Relay)

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 39 40

Sin comentarios

CrimeStopper FS-99 Guía de instalación Pagina 14